Expertly designed by Marley, the Ludlow Plus Concrete Interlocking Roof Tiles are crafted for strength and reliability, symbolising the very best in cost-effective roof tile solutions. These tiles, with their granular finish, require a minimum pitch of 22.5 degrees, which accentuates their functional yet timeless design, resulting in a clean and uniform roof finish.

Being part of Marley's top-of-the-range Concrete Interlocking Roof Tiles, these tiles excel in durability and performance. Marley Concrete Roof Tiles are among the most preferred brands on the market, lauded for their excellent coverage, high durability, and versatility. Therefore, if you're in search of a reliable, cost-effective, and popular roofing solution, the Ludlow Plus Concrete Interlocking Roof Tiles from Marley are an excellent choice.

Why Choose Marley Concrete Interlocking Roof Tiles?

Functional design
Cost effective and affordable
Compatible with Marley SolarTile
Small size reduces wastage
Can achieve an A+ rating in the BRE Green Guide to Specification
Certified â€œExcellentâ€ for BES 6001

Product Specifications:

Size of Tile:Â 387mm x 230mm

Colour:Â Antique Brown

Finish: Granular

Material:Â ConcreteÂ

Size of Tile:Â 387mm x 230mm

Minimum PitchÂ 25Â° Smooth (75mm headlap) 30Â° Granular (75mm headlap) 22.5Â° Smooth (100mm headlap)

Maximum Pitch:Â 90Â°

Minimum Headlap:Â 75mm

Maximum Gauge:Â 312mm

Cover Width:Â 204mm

Covering Capacity:Â 15.7 tiles /mÂ² at 75mm headlap 17.1 tiles /mÂ² at 100mm headlap

Weight of Tiling:Â 47kg/mÂ² (0.46 Kn/mÂ²) at 75mm headlap 51kg/mÂ² (0.50 Kn/mÂ²) at 100mm headlap

Battens Required:Â 3.2 lin.m/mÂ² at 75mm headlap 3.5 lin.m/mÂ² at 100mm headlapÂ 38x 25mm for rafters/supports not exceeding 450mm centres 50 x 25mm for rafters/supports not exceeding 600mm centres

Tile Nails:Â 50mm x 3.35mm

Hanging length: 361mm (nominal)

Please note:Â The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:

Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category.